Punch automation equipment, silicon steel sheet material stamping, NC feeder

The traditional silicon steel sheet shearing and cutting materials are all manual feeding, pedal-type shearing materials, and the straight strips are cut out, the working efficiency is obviously low, the work safety is lacking, the waste material is serious; the manual control of the cutting progress, The precision is low; and this production process can only cut rectangular sheets and it is difficult to cut the web.

The popular application of the NC feeder can fundamentally solve this production problem. The heavy-duty material rack discharge, the NC feeder with the shearing machine feeding production process can automatically complete the discharging, feeding, cutting, etc. The processing process greatly saves human resources, can cut the roll material and the rectangular material, and significantly improves the cutting precision and work efficiency.

When the NC feeder is installed with the shearing machine, the feeder and the shearing machine are fixed on the base. The feeding direction of the feeding machine is inclined at an angle A with the cutting edge of the shearing machine, and the oblique angle A is between 25 degrees and 35 degrees. Angle A is the best angle at 30 degrees.

The heavy material frame leaves the feeder - a fixed distance, maintains the heavy material frame, the center of the feeder coincides, and intersects with the center of the curved tool, making full use of the residual material of the roll material and the residual material at both ends, thereby achieving the quality assurance. For the purpose of material saving, this method can save about 15% of material compared with traditional straight-open strips.

In actual use, the reel is first placed on a heavy material rack and tightened. The tip end of the web is then passed through the feeder to the curved tool.

Adjust the adjusting wheel of the NC feeder's retaining wheel and heavy material frame to ensure that the coil material is in the middle of the arc cutting tool of the shearing machine, and the NC feeder PLC controls the feeding machine to coordinate with the shearing machine.

During work, the heavy material rack is unloaded and unloaded. The feeder feeds the shearing machine according to the feeding length and feeding time of the material, and then clamps the material. The shearing machine starts to move, and the curved cutter moves up and down to cut out the required The required curved strips are slipped into the tote, so that the cutting process is automatically completed under the control of the NC feeder PLC.

Products:

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.